powder coating: This is the base coating.It can be widely used in furniture,metal door,and any other metal products with big flat surface.It has a perfect performance,effective decoration. Products of different gloss are available, namely, high gloss (above 80), semi gloss(50-80), flat gloss (20-50)and no gloss (below 20). The gloss can be adjusted according to the customersdemand. Physical properties of the powderDensity :1.4-1.7 g/cm3 Granularity distribution100 below 100(It can be adapted to the specific demand of coating)Curing Condition Depending on the types of different products. For detailed information, please check the instruction book attached to our products.Coating performance Testing itemsStandards and methodsInspecting indexImpact strengthGB/T1732-199350/AdhesionGB/T9286-1998Grade 0Bending resistanceGB/T6742-19862Pencil hardnessGB/T6739-19961H-2HSlat mist resistanceGB/T1771-1991500hHeat moist resistanceGB/T1740-19791000hHeat resistance110/24h(all color)Good gloss retention, Aberration≤0.3-0.4Notations 1.The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment. The thickness of the coating layer is 60-80um. 2.The above performance index may slightly vary with the variation of the product types and artistic effects.· · Average coating rateA. Smooth Surface: 6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)B. Texture Surface:5-7/KG,film thickness is about 80-120μm Storage The products should be stored in ventilated dry and clean room with the temperature below 30. Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the conditions mentioned above, the products can be stored stably for 6 months. The product beyond pot limit should be reexamined, and it can still be used if the inspection results past muster. Avoid inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible.Notice This technical date is only for user reference, the concrete index is to measure incomes under the terms of Suring ,in case of the problem can not be solved, please contact the technology department of our factory.